Examples of decorative stone entrance hall, living room - 30 photos

In the construction market you can find many types of decorative stone. This finishing material imitates the texture and shape of its natural counterpart, and also has several advantages over it. The popularity of an artificial product due to its significantly lower cost with high performance properties. Following the recommendations, decorative stone trim can be done independently. The appearance of the finished surface sometimes does not allow to distinguish the facing material from natural stone, however, it is important to determine which is best for the same hallway to use. The right choice will help to design the interior, which will please the owners of the house for many years. Therefore, we will further discuss its varieties and laying technology.

Material Features

To characterize the facing material, it is enough to list its advantages. The first to find out about them were the owners of country houses when they discovered excellent properties from a stone purchased on the market. Let's try to list them briefly:

  • The cost of artificial products is much less than their natural counterparts;
  • The strength of the samples is ensured by a homogeneous structure. Due to factory production, accidental destruction of the stone is excluded;
  • The weight of imitation products is much less, which allows you to do without strengthening the foundation;
  • Installation is extremely easy, since the stone one side is flat. If we are talking about a tile, then it has perfect geometric shapes;
  • The processing of the material is extremely easy, it lends itself well to sawing;
  • Also in the range you can find products with a variety of cutting technology, angular and external models;
  • The surface for the entrance hall can be any stone: wood, stone;
  • When choosing premises, there are also no restrictions, since the material is not afraid of ultraviolet radiation, fungus or dampness;
  • Moisture resistance of artificial elements of the decor allows you to operate them in a shower;
  • The aesthetic qualities of a fake stone make it possible to harmonize perfectly with other types of facing materials;

    Artificial stone in the corridor

  • The design of the outer cover is so accurate that it is sometimes difficult to distinguish a fake from the original;
  • The factory assortment differs in boundless breadth and is able to satisfy everyone without exception;
  • Damaged elements of the finished surface are easily replaced, repair is not difficult;
  • Antistatic artificial stones prevent dust or grease from appearing on the surface. The ultimate in ease of caring for products is to wipe the wall with a regular brush or rag;
  • The ecological composition of the ingredients ensures the safety of the artificial product and the absence of discharge of harmful substances;
  • Lightness and perfect symmetry of products facilitate their transportation.
Wall decor in the living room under the stone

Such a number of useful properties allowed the product to gain fame in a short period of time: the owners of country mansions began to use it massively when finishing. He has almost no flaws, but differs in class composition. Inexpensive material may be subject to abrasion and detrimental effects of aggressive environment (for example, when it comes to the kitchen). Additional protective coating required. The durability of an artificial stone is somewhat less than that of a natural element. The main disadvantage of the decorative stone in the hallway is not so much its some property, as less durable fasteners. If he can serve for several decades, they will fail earlier. To ensure the longest possible service life and the invariability of the presentation of the product, it is necessary to make the right choice of texture for a specific room.

Facing the bedroom wall under artificial stone

Varieties of decorative product

Production facilities in modern factories can produce all kinds of building products. As well as the appearance, the composition of various types of material is different, which directly affects its properties. Among the main players in the market are the following types of decorative finishing stone:

  1. Porcelain stoneware. The characteristics of this type allow it to be used for finishing the external facades. The composition of ceramic granite tiles includes feldspar, high-quality clay, as well as dyes. The manufacturing process involves pressing and firing the material. The consequences of this treatment is the high strength of the product and its moisture resistance. Tile becomes possible to use to cover the walls of the shower room. Uniform coloring is ensured by a uniform structure throughout the depth of the sample. The factory range offers users a variety of geometric shapes of tiles, colors (mat or gloss), texture features (polished or roughened). In a section the same texture is observed, as at a natural stone. Products made of porcelain stoneware can easily withstand temperature fluctuations, but they should not be exposed to chemical attack.
Decorating the wall with light decorative stone in the dining room

For cladding exterior walls it is recommended to use a thick tile of 14 mm.

  1. Agglomerates. The decoration of the hall with a decorative stone of agglomerates imitates very accurately the external properties of natural elements in nature. For their production uses a special filler (granite chips, quartz sand), adhesive binder (polyester resin) and pigment dyes. The most popular are agglomerates of quartz, because they are distinguished by their durability and elegant appearance. The hardness of the product allows it to be used for finishing the external facades.
  2. Products based on concrete or plaster.
Decorative stone on the bedroom wall with a combination of painted walls

Despite the attractiveness of the previous species, the most common are still building materials made of concrete and gypsum. The production technology gives sand-cement products sufficiently high strength, allowing them to be used to finish the hallway. The properties of gypsum and concrete materials are somewhat different:

  • It is possible to process the gypsum stone with the help of a hand tool, the concrete one is cut by a grinder;
  • Gypsum samples are twice as light as concrete, which allows them to be installed on gypsum board;
  • The smooth surface of concrete stones adorns exterior walls better than plaster;
  • The cost of gypsum products is somewhat lower compared to concrete material.
Bar counter and large stone

With all the differences, the technology of manufacture of these materials is one: fill in geometric shapes.

Stone wall in the living room

Finished products are recommended to be coated with moisture-resistant acrylic impregnation. Then they become hypopolymer.

The combination of stone and dark wallpaper for painting

Recommendations for choosing a decorative stone for cladding

Literate finish involves many aspects. Due to the low illumination of the hall, it is recommended to use warm tones of artificial material. A small area of ​​the hallway suggests the use of small tiles, since a large texture will make the space heavy. If it is too thick to use stone in the interior, it can create an undesirable effect of a dark cave. To reduce the gloom of such a tunnel, it is necessary to arrange additional lighting or alternate stone plots with other types of finishes. Narrow rooms should not be decorated with a dark stone.

Tile for laying

In the bedroom, a stone insert made of large pebbles at the head of a large sofa will look great. A similar texture is good to use near the fireplace. The tile will well decorate the place where the flat TV will be installed. In the kitchen, decorative stone helps to zone the space, creates an apron insert near the sink. In the bathroom they like to use bright glossy patterns of moisture-proof material. Porcelain tile looks great on selected sections of the walls.

The decorative stone in the hallway looks best, since it is a guest area with many doorways. The best is a combination of artificial material with painted walls. It is necessary to choose the right color scheme to make it look harmonious. The use of high-tech style will perfectly complement the stone surface with elements of glass or metal. It requires good lighting.

Finishing the hallway with a decorative stone implies covering the imitation surface with semi-matt acrylic impregnation.

Stone walls are widely used in the winter garden, where the rough texture of light building materials can emphasize its airiness. This will be especially obvious in contrast with the dark wooden frames on the windows.

Wall decoration technology

Before installation, you will need to go through a series of stages and carry out the preparatory work:

  • The wall must be cleaned of grease and dust, old finish;
  • Think in advance of the placement of utilities and electrical structures;
  • The plane of the wall should be leveled if the curvature index exceeds 0.2 mm / m. An exception can be made only for the rough texture of building materials;
  • Existing cracks should be patched with plaster, then apply a layer of leveling putty. If necessary, you can use the method of reinforcement. The best option for leveling can serve as wall cladding with plasterboard sheets;
  • When the wall is sufficiently smooth, it must be treated with a suitable primer;
  • To speed up the installation and accurately determine the number of products, it is recommended to draw a sketch of the finished lining on the prepared wall. Or, using the puzzle method, decorate decorative patterns on the floor;
An example of laying in the kitchen

For fixing tiles on the walls used adhesive binder. If you prepare the solution correctly, it will fix the imitation image for many years. The glue recipe looks simple: a special powder is combined in the right proportions (indicated on the package) with water, and then whipped with a mixer. The finished solution is able to fix even bulky stones. For smaller products it is possible to use liquid nails or low cost sand-cement mortar.

Stone panel, stylish and rich

DIY stone laying

The performance characteristics of the decorative stone allow you to do the laying yourself. The simplicity of the procedure is ensured by the use of special beacons at the corners of the prepared wall and cord, which is attached to them in a horizontal plane. During laying, the upper end of the decorative elements is fitted to the tightly stretched horizontal. The operation itself starts from the corner in one of three possible ways:

  • expensive method involves the use of corner stones and provides the speed of installation;
  • with a suitable texture, it is possible to use the overlap method;
  • Independent trimming of the ends of a decorative tile with a grinder increases the installation time somewhat.
Wild stone wall

Glue binder is applied to the wall along the entire length of the horizontal segment. After arranging the corner of the wall, all the other elements are fixed to each other. It is important to remove the protruding glue solution in a timely manner so that the aesthetic appearance of the wall does not suffer. The uniformity of the seam may be achieved by installing mounting crosses.

Interior decoration in the apartment corridor

After the first row was fixed - the horizontal level in the form of a cord with beacons moves higher. Before you glue the next row, you must wait until the previous one is fixed and dry. The vertical direction does not matter, imitation elements can be fixed both from below and from above. When using the bottom-up direction, it is possible that the adhesive binder may hit the bottom row of fixed elements. Finally, the liquid glue will dry after two days, after which you can begin to seal the seams between the tiles. The usual putty or concrete-glue mastic is used. Laying defects such as chips or cracks are masked by an airbrush that is made from the following components: water, acrylic lacquer, tonal additive. It is also useful to cover the finished surface with a water-repellent layer. This can be considered the work of laying a decorative stone with their own hands completed.

Living room and exit to the terrace

Conclusion

Subject to the above recommendations, it is possible to carry out the decoration of the walls with decorative stone with your own hands. A competent approach to the selection and installation of building materials will allow you to create a chic interior design type.

Watch the video: 50 Living Room Designs With Natural Stone Walls (March 2024).

Leave Your Comment